3M™ Knifeless Tape Bridge Line Tape

Image One Impact Click Here

For additional product information Click Here

• 1/2” width
• For use between wide gaps like between doors and seams
Please visit www.knifelesstechsystems.com to view installation and product use videos.
The First Patented System To Virtually Eliminate Using A Knife!
• Practically eliminates the possibility of cutting into a vehicle’s paint
• Trimming is one of the most important parts of a wrap, but with traditional methods it’s done at the end of the job when installers may be tired and more prone to making mistakes
• Using Knifeless Tape you can reposition the cut line. If you’re using a knife, one bad cut can ruin a panel, forcing you to reprint, or take significant time to salvage the panel. This costs you time and money
• Knifeless Tape is faster and easier than traditional trimming. On average it takes an installer one vehicle wrap to feel comfortable using the Knifeless Tape method. Many installers report using the Knifeless Tape method saves a significant amount of time

New and Improved!
• Translucent tape so you can see exactly where your line is and adjust as needed
• Absolutely no residue!
• Now you can do turns and corners even better than ever
• New pricing designed to allow for use on all installations

Apply Knifeless Tape
• To create a trimming line, apply the Knifeless Tape along the edge of the tail light where you want to trim the wrap.
• If you need to change the line, simply reposition the tape.

Apply Wrap & Pull Knifeless Tape
• Install your wrap in panels as you normally would.
• The Knifeless Tape is coated so it will not stick to the wrap vinyl.
• Pull the filament along the Knifeless Tape line and the wrap is cleanly and accurately cut.
Remove Excess Wrap
• Pull off the excess wrap, remove the Knifeless Tape and tuck the trimmed vinyl in around the edges.
• There’s no need to remove any vehicle accessories.
• Knifeless Tape gives you a perfect cut every time!