Avery MPI 2630 Textured Wall and Floor Film With Permanent Adhesive

For additional product information Click Here

For additional product information Click Here

Avery Dennison MPI 2600 Series Wall Film is a tough, scuff-resistant, flexible, white premium calendered vinyl film designed specifically for wall graphic applications.
The MPI 2630 & 2631 Textured films offer a unique Canvas, Crushed Stone or Stucco look to ordinary wall graphics.
MPI 2600 Series offers an excellent choice for wall graphic applications that require easy installation.
Face: 6.0 to 8 mil*(152 microns) low gloss calendered
Adhesive: Acrylic (clear)
MPI 2610 - Permanent
MPI 2611 - Removable
MPI 2630 - Permanent
MPI 2631 – Removable
Liner: MPI 2610 2611, 2630 rem and 2631 -70# StaFlat MPI 2630 perm – 90# StaFlat TM
Application Surfaces: Flat
Features:
• 100% opacity, completely covers whatever is underneath
• Matte Finish (MPI 2610 & 2611)
• Textured finish (MPI 2630 & MPI 2631)
• Great image clarity and color pop
• Dimensionally stable liner for easy converting
• ICC profiles available on the Avery Dennison website (http://avery-us.color-base.com/)
• ASTM E84 Class 1 or A rating (MPI 2611, MPI 2630 Stucco & Canvas, MPI 2631 Stucco, Canvas and Crushed Stone)
• ASTM E84 Class 2 or B rating (MPI 2630 Crushed Stone)
• CAN ULC S102.2 (MPI 2611) - Flame Spread Rating: 10 , Smoke Developed Classification: 40
• MPI 2611 meets the requirements of IMO FTP Code Part 2 & 5 for all material categories
Conversion:
• Latex Inkjet
• Solvent based inkjet
• UV inkjet
• Mild/Eco Solvent inkjet
To achieve the best possible print quality, please make sure the correct ICC Profile and printer setting are used.
Common Applications:
• Wall Murals
• POP/ Tradeshow
Product Data Sheet
Avery Dennison ® MPI 2600 Series Wall Film Permanent and Removable StaFlat
Physical Characteristics:
Caliper, face MPI 2610 & 26111 - 6.0 mil (152 μm) Canvas & Stucco – 6.0 mil (152 μm) Crushed Stone - 8.0 mil (203 μm)
Caliper, adhesive 1.0mil (25 μm)
Dimensional stability <0.065”(1.651 mm)
Note: Ink loads in excess of 250% may cause increased shrinkage and/or increased initial adhesion of the printed film
Tensile at Yield 4.0 - 8.0 lb/in (0.7–1.5 kg/cm)
Gloss Hunter Gloss @ 60 degrees MPI 2610 & 2611 = 15 GU MPI 2630 & 2631 = 4 GU
Adhesion: 90# StaFlat RS 15 min 24 hr
Removable - 0.5 - 1.0 lbs/in (175 N/m)
Permanent - 1.0 lbs/in(175 N/m)
Removable - 1.5 lbs/in (262 N/m)
Permanent - 4.0 lbs/in (700 N/m)
Flammability Self Extinguishing
• ASTM E84 Class 1 or A rating (MPI 2611, MPI 2630 Stucco & Canvas, MPI 2631 Stucco, Canvas and Crushed Stone)
• ASTM E84 Class 2 or B rating (MPI 2630 Crushed Stone)
• CAN ULC S102.2 (MPI 2611) - Flame Spread Rating: 10 , Smoke Developed Classification: 40
• MPI 2611 meets the requirements of IMO FTP Code Part 2 & 5 for all material categories
Shelf-Life 2 years from date of manufacture (when stored at the following temperatures and humidity conditions 68°-77° F (20° - 25° C) and 50±5% R. H.)
Durability Vertical Exposure See chart on page 4
Min. Application Temperature 40° F (4° C)
Service Temperature -40° to 180°F (-40° to 82° C)
(Reasonable range of temperatures which would be expected under normal environmental conditions).
Chemical resistance Resistant to most mild acids, alkalis, and salt solutions