Avery MPI 2631 Textured Wall Film With Removable StaFlat™ Adhesive

For additional product information Click Here

For additional product information Click Here

Avery Dennison MPI 2600 Series Wall Film is a tough, scuff-resistant, flexible, white premium calendered vinyl film designed specifically for wall graphic applications.
The MPI 2630 & 2631 Textured films offer a unique Canvas, Crushed Stone or Stucco look to ordinary wall graphics.
MPI 2600 Series offers an excellent choice for wall graphic applications that require easy installation.
Face: 6.0 to 8 mil*(152 microns) low gloss calendered
Adhesive: Acrylic (clear)
MPI 2610 - Permanent
MPI 2611 - Removable
MPI 2630 - Permanent
MPI 2631 – Removable
Liner: MPI 2610 2611, 2630 rem and 2631 -70# StaFlat MPI 2630 perm – 90# StaFlat TM
Application Surfaces: Flat
Features:
• 100% opacity, completely covers whatever is underneath
• Matte Finish (MPI 2610 & 2611)
• Textured finish (MPI 2630 & MPI 2631)
• Great image clarity and color pop
• Dimensionally stable liner for easy converting
• ICC profiles available on the Avery Dennison website (http://avery-us.color-base.com/)
• ASTM E84 Class 1 or A rating (MPI 2611, MPI 2630 Stucco & Canvas, MPI 2631 Stucco, Canvas and Crushed Stone)
• ASTM E84 Class 2 or B rating (MPI 2630 Crushed Stone)
• CAN ULC S102.2 (MPI 2611) - Flame Spread Rating: 10 , Smoke Developed Classification: 40
• MPI 2611 meets the requirements of IMO FTP Code Part 2 & 5 for all material categories
Conversion:
• Latex Inkjet
• Solvent based inkjet
• UV inkjet
• Mild/Eco Solvent inkjet
To achieve the best possible print quality, please make sure the correct ICC Profile and printer setting are used.
Common Applications:
• Wall Murals
• POP/ Tradeshow
Product Data Sheet
Avery Dennison ® MPI 2600 Series Wall Film Permanent and Removable StaFlat
Physical Characteristics:
Caliper, face MPI 2610 & 26111 - 6.0 mil (152 μm) Canvas & Stucco – 6.0 mil (152 μm) Crushed Stone - 8.0 mil (203 μm)
Caliper, adhesive 1.0mil (25 μm)
Dimensional stability <0.065”(1.651 mm)
Note: Ink loads in excess of 250% may cause increased shrinkage and/or increased initial adhesion of the printed film
Tensile at Yield 4.0 - 8.0 lb/in (0.7–1.5 kg/cm)
Gloss Hunter Gloss @ 60 degrees MPI 2610 & 2611 = 15 GU MPI 2630 & 2631 = 4 GU
Adhesion: 90# StaFlat RS 15 min 24 hr
Removable - 0.5 - 1.0 lbs/in (175 N/m)
Permanent - 1.0 lbs/in(175 N/m)
Removable - 1.5 lbs/in (262 N/m)
Permanent - 4.0 lbs/in (700 N/m)
Flammability Self Extinguishing
• ASTM E84 Class 1 or A rating (MPI 2611, MPI 2630 Stucco & Canvas, MPI 2631 Stucco, Canvas and Crushed Stone)
• ASTM E84 Class 2 or B rating (MPI 2630 Crushed Stone)
• CAN ULC S102.2 (MPI 2611) - Flame Spread Rating: 10 , Smoke Developed Classification: 40
• MPI 2611 meets the requirements of IMO FTP Code Part 2 & 5 for all material categories
Shelf-Life 2 years from date of manufacture (when stored at the following temperatures and humidity conditions 68°-77° F (20° - 25° C) and 50±5% R. H.)
Durability Vertical Exposure See chart on page 4
Min. Application Temperature 40° F (4° C)
Service Temperature -40° to 180°F (-40° to 82° C)
(Reasonable range of temperatures which would be expected under normal environmental conditions).
Chemical resistance Resistant to most mild acids, alkalis, and salt solutions