GAP™ SC-1600: Houston-Inst. DMP Series; HTD Destiny 4000; Jorlink; Newing-Hall Accutrac 439; Vytek 500/1000

Gap Click Here

For best results, use the following recommended plotter blade angles when cutting these material thicknesses:
30 degree 2-4 mil / 45 degree 4-12 mil. (For cutting 12 mil+, see SC-1660 and SC-1760 blades) (For cutting 12 mil+ on the Newing-Hall Accutrac 439, see the SC-1760 blade)
Target Plotters
• Houston-Inst. DMP Series
• HTD Destiny 4000
• Vytek 500 / 1000
• Newing-Hall
• Accutrac 439
• Jorlink