Kapco® 2 Mil Printable Frosted Cast Vinyl - Permanent Clear Adhesive

Kapco® Click Here

Product Page: Click Here

Designed to give the effect of etched/sandblasted glass to a variety of applications including windows and glass doors.
Can be applied wet. Rapid Tac is the recommended application fluid.
2 Mil Printable Frosted Cast Vinyl
Clear Permanent Adhesive for Solvent, Latex & UV Printers
• Can be used for interior and exterior signage
• Designed to give effect of etched/sandblasted glass
• Uses include decorative applications including windows, glass doors
• Compatible with OEM Latex, Solvent & UV Curable Inks
• 2 mil Synthetic Traction Liner: Ideal for wet application
Construction
Product Number: SOL/FROSTCAST
Adhesive: Clear Permanent Solvent Acrylic
Film: 2 mil Vinyl
Liner: 4.25 mil Synthetic Traction Liner
Finish: Frosted Glass
Gloss Level: 15 (avg.) @ 60°
Typical Performance Values
The following information on physical and chemical characteristics is based upon tests believed to be reliable. The values are intended only as a source of information. They are given without guarantee and do not constitute a warranty. The purchaser should independently determine, prior to use, the suitability of this material for his/her specific purpose. (Data represents averages and is not intended for use as a specification.)
Durability: Outdoor - 7 years unprinted
Minimum Application Temperature: +50° F (Minimum for Substrate)
Service Temperature Range: -40° F to + 180° F
Typical Adhesion Values: PSTC-1
Substrate Stainless Steel
15 mins 5.0 lb/in
Shelf Life: 1 year from ship date when stored in proper conditions 70° F and 50% relative humidity