01	02	03	04	05
Red	Blue	Green	Pink	Orange
06
Violet

The Magic Touch USA� MC Spectrum� 20" x 15 yd

For additional product information Click Here

McSpectrum is a Hologram Metallic hybrid that gives you amazingly different color and relection from every angle.

Spectrum is a line of transparent, shiny and shimmering HTV where the colors change depending on your angle of view. It is truly amazing and unique. If you looking for a special and amazing HTV you must give Spectrum HTV a try.

Spectrum Vinyl Instructions for Heat Press Application

Create design and place your setting to mirror in your design space.
Tip: By mirroring your design you are flipping the placement so when you place the design down it is right side up.
Place color shiny side down on your mat. Dull side (no color) is facing up during cutting.
Cut design and weed vinyl.
Place item on the heat press with your design in the area you want to press.
Place a cover sheet (Teflon paper or Parchment paper) over your design and press with medium pressure at 300�F � 315�F for 15 seconds.
Open press, allow design to cool and cold peel application sheet in 1 pull for best results
Remove product from press.

Spectrum Vinyl Instruction for Hand Iron Application

Create design and place your setting to mirror in your design space.
Tip: By mirroring your design you are flipping the placement so when you place the design down it is right side up.
Place color shiny side down on your mat. Dull side (no color) is facing up during cutting.
Cut design and weed vinyl.
Set iron dial between Cotton and Linen pending the item you are pressing.
Place on flat hard surface (Iron board is not recommended).
To achieve best press application, don�t use steam function.
Place a cover sheet (Teflon paper or Parchment paper) over your design and press iron with firm pressure straight down for 30 to 60 seconds (pending the design).
Tip: Don�t move iron slide to slide.
Allow design to cool for a few seconds and cold peel application sheet in 1 pull for best results
Tip: If design lifts up during cold peel process, re-press design area with a cover sheet for 10 seconds.

Material Recommendations for HTV Vinyl

All products should be polyester or cotton. Nylon materials will not work.
100% Polyester
100% Cotton
50% cotton / 50% polyester
Lycra or Spandex are workable

Care Instructions

For best care we suggest waiting 24 to 48 hours before washing your garment.
Suggest to turn item inside out and washing in cold water.
Suggest to dry on low setting or hang dry item for best care.
Suggest to stay away from using chlorine bleach.