CFP Flex HTV Sublimation Print A

Sublimation Print A
Our latest INNOVATION: Sublimation Print A is a solvent-free water-based polyurethane, with an adhesive polyester carrier, directly printable by SUBLIMATION INKS & INKJET white, applicable on ALL clear and dark TEXTILE available in 8.5” x 11” formats.
Applicable on clear or dark textiles: cotton, polyester, and nylon
Very soft touch, thin and stretch film
Quick transfer at low temperature: 120°C-15sec
A professional quality with vibrant colors and details
Compatible with all sublimation printer
Compatible with standard sublimation inks
Can be printed with sublimation inks
Easy and quick direct print. Also, no need to wait after printing to cut and press
Possibility to cut out the contours thanks to a plotter with an optical eye function
No need of Application Tape for simple shapes as it is easy to remove from carrier and stays flat
Withstand many washing cycles up to 40°C

Print A DATA SHEET
PRODUCT: PRINT A - Print and plot film for heat transfer on textiles
CODE: HT-U301A-30150
COLOR WHITE
DESCRIPTION: Printable mat, white, water based, solvent and PVC free film, laminated on a heat-adhesive layer, itself laminated on a low tack self-adhesive polyester carrier. For solvent, eco solvent (incl. Truevis 2) & Latex inks
THICKNESS (+/-5%)
Heat-adhesive film: 80 microns
Self-adhesive carrier: 110 microns
TEXTILES: Cotton - Polyester - Polycotton - Coated Nylon/Polyester ( depending upon coating type ).
ADVANTAGES
1. Easy and accurate weeding, even of small letters. EACH TIME
2. Quick pressing time at low temperature: 140°C / 10 seconds on cotton, polyester, polycotton, etc…
(special settings for coated nylon).
3. Compatible with many types of inks: solvent, eco-solvent and latex
4. Universal thermo adhesive with excellent bonding on most textiles.
5. Elastic and strong true white film, doesn't wrinkle after washings.
6. Ecofriendly, water based, solvent and PVC free coating.
7. Low carbon profile manufacturing: all operations made under one roof.
8. Last generation machines and exclusive manufacturing process, ensuring competitive prices.
PRESSURE: Medium

HEATPRESSING WITHOUT OVERLAPPING
All textiles
1. In case of new textile, make preliminary trials.
2. Print and plot positive image with solvent or eco-solvent ink.
3. Transfer on garment with Series 600 Application Tape, protecting it with a baking paper if press directly (no Application Tape)
Coated Nylon
1. Press at 150°C or 302°F for 20 seconds, slowly peel the tape.
2. Press again, at 150°C or 302°F for 10 seconds, while protecting with a baking paper.
Washing temperature: 40°C or 104°F
Other textiles
Pressing: 140°C or 284°F for 10 seconds
Washing temperature: 60°C or 140°F

FURTHER RECOMMANDATIONS
1. Always protect material from direct contact with heating plate with a release baking paper.
2. Wait 24 hours before washing.
3. Do not use bleach or other aggressive chemical agents.
4. Iron from inside.
5. Store products in a tempered and dry room, protected from direct sun rays.
RISK OF RESUBLIMATION: For sublimated textiles, it is recommended to use PRINT SOFT BLOCKSUB with a soft and elastic barrier to re-sublimation
SAFETY: Inert components, REACH compliant, without PVC, plastifiers, heavy metals, VOC, according to OEKO-TEX Standard 100 Class 1.
IRON ON: After printing, cutting (positive mode) and weeding, use Series 600 Application Tape to transfer the image onto garment. Protect the tape with a baking paper, set the iron on maximum heat. Do not use steam. Press strongly, from the center towards the edges. Peel the tape when warm