01E	02E	03E	05E	06E
Silver	Gold	Green	Red	Blue
08E	09E	11E	18E	27E
Navy Blue	Light Gold	Sky Blue	Orange	Pink
28E	33E	35E	42E	43E
Purple	Royal Blue	Lime	Light Pink	Pastel Pink
44E	45E	01CE	09CE	01SE
Light Sky Blue	Pastel Mint	Crystal Silver	Crystal Gold	Spectrum Silver
09SE
Spectrum Gold

The Magic Touch USA® MC Embossed™ 20" x 27 yd

For additional product information Click Here

This line of Embossed Heat Vinyl Material Offers a textured, chrome-like surface Durable and easy to cut and weed
Add a fun unexpected metallic finish to your designs Pressure-sensitive carrier allows easy repositioning.

Embossed HTV vinyl materials are a mix of high-tech colors and textures! The amazing chrome-like surface gives your design a unique embossed textured stamp finish. Our Embossed HTV is durable, easy to weed and is a great layering vinyl.

Embossed HTV Instructions for Heat Press Application
Create design and place your setting to mirror in your design space.
Tip: By mirroring your design you are flipping the placement so when you place the design down it is right side up.
Place color shiny side down on your mat. Dull side (no color) is facing up during cutting.
Cut design and weed vinyl.
Place item on the heat press and put your vinyl design in the area you want to press.
Place a cover sheet (Teflon paper or Parchment paper) over your design and press with medium pressure at 300°F – 315°F for 15 seconds.
Open press, allow design to cool and cold peel application sheet in 1 pull for best results.
Remove product from press.

Embossed HTV Instruction for Hand Iron Application

Create design and place your setting to mirror in your design space.
Tip: By mirroring your design you are flipping the placement so when you place the design down it is right side up.
Place color shiny side down on your mat. Dull side (no color) is facing up during cutting.
Cut design and weed vinyl.
Set iron dial between Cotton and Linen pending the item you are pressing.
Place on flat hard surface (Iron board is not recommended).
To achieve best application press, don’t use the iron steam function.
Place a cover sheet (Teflon paper or Parchment paper) over your design and press iron with firm pressure straight down for 30 to 60 seconds (pending the design).
Tip: Don’t move iron slide to slide.
Allow design to cool for a few seconds and cold peel application sheet in 1 pull for best results.
Tip: If design lifts up during cold peel process, re-press design area with a cover sheet for 10 seconds.

Material Recommendations for HTV Vinyl

All products should be polyester or cotton. Nylon materials will not work.
100% Polyester
100% Cotton
50% cotton / 50% polyester

Care Instructions

For best care we suggest waiting 24 to 48 hours before washing your garment.
Suggest to turn item inside out and washing in cold water.
Suggest to dry on low setting or hang dry item for best care.
Suggest to stay away from using chlorine bleach.